Search results for "TIO2 NANOTUBES"

showing 10 items of 16 documents

ZnO/ZnS heterostructures for hydrogen production by photoelectrochemical water splitting

2016

This work studies the photoelectrochemical behavior of novel ZnO/ZnS heterostructures obtained by means of anodization in water and glycerol/water/NH4F electrolytes with different Na2S additions under controlled hydrodynamic conditions. For this purpose different techniques such as Field Emission Scanning Electronic Microscopy (FE-SEM) with EDX, Raman spectroscopy and photoelectrochemical water splitting tests under standard AM 1.5 conditions have been carried out. The obtained results showed that the hydrodynamic conditions promoted an ordered nanotubular morphology which facilitates electron-hole separation and consequently, the photoelectrochemical activity for water splitting is enhance…

Materials scienceGeneral Chemical EngineeringInorganic chemistry02 engineering and technologyElectrolyte010402 general chemistry01 natural sciencesINGENIERIA QUIMICAsymbols.namesakeZINCRAMAN-SPECTROSCOPYANODIZATIONTIO2 NANOTUBESHydrogen productionAnodizingELECTROLYTESPHOTOCATALYTIC ACTIVITYHeterojunctionGeneral Chemistry021001 nanoscience & nanotechnologyHYDRODYNAMIC CONDITIONSEVOLUTION0104 chemical sciencesARRAYSElectroquímicaField electron emissionsymbolsWater splitting0210 nano-technologyRaman spectroscopySENSITIZED ZNODark current
researchProduct

Influence of annealing atmosphere on photoelectrochemical response of TiO2 nanotubes anodized under controlled hydrodynamic conditions

2021

[EN] The influence of three annealing atmospheres (air, nitrogen and argon) and the use of controlled hydrodynamic conditions (from 0 to 5000 rpm) on morphological, structural, chemical and photoelectrochemical properties of TiO2 nanotubes have been evaluated. For this purpose, different characterization techniques have been used: Field Emission Scanning Electron Microscopy, Raman Confocal Laser Spectroscopy, X-Ray Diffraction, X-Ray Photoelectron Spectroscopy, Incident Photon-to-electron Conversion Efficiency measurements, ultraviolet-visible absorption spectra, Mott-Schottky analysis and photoelectrochemical water splitting tests. According to the results, it can be concluded that both hy…

ArgonAbsorption spectroscopyAnnealing (metallurgy)General Chemical EngineeringPhysics::Opticschemistry.chemical_elementThermal treatmentHydrodynamic conditions photoelectrochemical water splittingINGENIERIA QUIMICAAnalytical ChemistryAnnealing atmosphereCondensed Matter::Materials Sciencesymbols.namesakechemistryX-ray photoelectron spectroscopyChemical engineeringTiO2 nanotubesPhysics::Atomic and Molecular ClustersElectrochemistrysymbolsWater splittingAnodizationSpectroscopyRaman spectroscopyJournal of Electroanalytical Chemistry
researchProduct

Effect of Reynolds number and lithium cation insertion on titanium anodization

2016

This work studies the influence of using hydrodynamic conditions (Reynolds number, Re = 0 to Re = 600) during Ti anodization and Li+ intercalation on anatase TiO2 nanotubes. The synthesized photocatalysts were characterized by using Field Emission Scanning Electron Microscope (FE-SEM), Raman Confocal Laser Microscopy, Electrochemical Impedance Spectroscopy (EIS), Mott-Schottky analysis (M-S), photoelectrochemical hydrogen production and resistance to photocorrosion tests. The obtained results showed that the conductivity of the NTs increases with Li+ intercalation and Re. The latter is due to the fact that the hydrodynamic conditions eliminate part of the initiation layer formed over the tu…

AnataseMaterials sciencehydrodynamic conditionsGeneral Chemical EngineeringIntercalation (chemistry)Analytical chemistrychemistry.chemical_element02 engineering and technology010402 general chemistry01 natural scienceswater splittingINGENIERIA QUIMICAsymbols.namesakeElectrochemistryTiO2 nanotubesPhotocurrentelectrochemical impedance spectroscopy (EIS)Titani021001 nanoscience & nanotechnology0104 chemical sciencesDielectric spectroscopyField emission microscopyElectroquímicachemistrysymbolsMott-Schottky analysisWater splitting0210 nano-technologyRaman spectroscopyTitanium
researchProduct

Redshift of absorption threshold of TiO2 Nanotubes due to Cu2O electrodeposition

2013

Settore ING-IND/23 - Chimica Fisica ApplicataRedshift of absorption threshold TiO2 Nanotubes Cu2O electrodeposition
researchProduct

Electronic Properties of Thermal Oxides on Ti and Their Influence on Impedance and Photoelectrochemical Behavior of TiO2 Nanotubes

2017

Thermal oxidation of titaniumwas carried out at 350◦C, 450◦C, and 550◦C for 2 h or 12 h.X-rayDiffraction and Raman Spectroscopy suggest that the thermal oxides are scarcely crystallinewhen the annealing temperature is low, while both anatase and rutile are present for high annealing temperature and time. Photoelectrochemical measurements allowed estimation of a bandgap decreasing from 3.35 eV to 3.15 eV with increasing annealing temperature. The impedance spectra confirmed the formation of n-type semiconductors, with an impedance strongly decreasing on going from a reverse bias toward a forward bias regime. TiO2 nanotubes grown by anodizing Ti in NH4F and water containing ethylene glycol so…

Materials scienceRenewable Energy Sustainability and the EnvironmentAnnealing anodizing Impedance photoelectrochemistry Thermal oxidation Ti TiO2 Nanotubes020209 energyNanotechnology02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter PhysicsSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsSettore ING-IND/23 - Chimica Fisica ApplicataThermal0202 electrical engineering electronic engineering information engineeringMaterials ChemistryElectrochemistry0210 nano-technologyElectrical impedanceElectronic properties
researchProduct

The effect of Annealing Conditions on the Impedance and on the Photoelectrochemical behavior of TiO2 Nanotubes

2015

Titanium oxide nanotubes (NTs) have attracted much attention during last decade due to their special characteristics such as one-dimensional highly ordered geometry with large surface area and good chemical and optical stability.

Settore ING-IND/23 - Chimica Fisica ApplicataAnnealing Conditions Impedance and Photoelectrochemical characterizations TiO2 Nanotubes
researchProduct

Synergistic effect between hydrodynamic conditions during Ti anodization and acidic treatment on the photoelectric properties of TiO2 nanotubes

2015

In the present work, the combined influence of controlled hydrodynamic conditions during Ti anodization and the acidic treatment with HClO4 on the photoelectric properties of mixed anatase/rutile TiO2 nanotubes has been studied. Anodized samples were analyzed by means of Field Emission Scanning Electronic Microscopy (FE-SEM), Confocal Raman Microscopy, electrochemical measurements (electrochemical impedance spectroscopy and Mott-Schottky analysis) and photoelectrochemical measurements. It has been observed that the use of hydrodynamic conditions increases the surface area of nanotubes, while acidic treatment enhances their conductivity. Besides, there is a clear synergistic effect between t…

PhotocurrentAnataseAnodizingChemistryHidrodinàmicaAnalytical chemistryConductivityCatalysisINGENIERIA QUIMICADielectric spectroscopyHydrodynamic conditionsElectroquímicaField electron emissionsymbols.namesakeChemical engineeringRutilesymbolsTiO2 nanotubesMott-Schottky analysisElectrochemical impedance spectroscopy (EIS)Physical and Theoretical ChemistryPhotocatalysisRaman spectroscopy
researchProduct

Photoelectrochemical characterization of Cu2O-nanowire arrays electrodeposited into anodic alumina membranes

2007

Perfectly aligned nanowire arrays of polycrystalline Cu2O were grown by template-pulsed electrodeposition from a cupric acetate-sodium acetate bath into anodic alumina membranes (AAM). The photoelectrochemical behavior of arrays with different nanowire lengths (0.5 mu m and 2 mu m) was investigated in neutral solution, and the results compared to those pertaining to Cu2O films grown with the same procedure. Although all samples displayed the same indirect bandgap (similar to 1.9 eV), differences were observed both in photocurrent intensity and sign. The latter changed with potential and wavelength in different ways for nanowires and films, revealing a different defect concentration in the t…

Materials scienceFabricationBand gapGeneral Chemical EngineeringNanowireOxideFABRICATIONchemistry.chemical_elementCU2O NANOWIRESCOPPERNanotechnologyFILMSLAYERSchemistry.chemical_compoundTEMPLATEElectrochemistryGeneral Materials ScienceElectrical and Electronic EngineeringPhysical and Theoretical ChemistryTIO2 NANOTUBESPhotocurrentNI NANOWIRESNANOWIRE ARRAYSOXIDECopperAnodeSettore ING-IND/23 - Chimica Fisica ApplicatachemistryChemical engineeringCrystallite
researchProduct

Photoelectrochemical Evidence of Cu2O/TiO2 Nanotubes Hetero-Junctions formation and their Physicochemical Characterization

2014

Cu2O/TiO2 nanotubes heterojunctions were fabricated by electrochemical deposition of cuprous oxide on TiO2 nanotubes arrays grown by anodizing. X-ray diffraction and Raman Spectroscopy analysis allows for identification of Cu2O, whose morphological features were studied by Scanning Electron Microscopy as a function of the charge circulated during the electrodeposition step. Photoelectrochemical measurements in aqueous solutions evidenced a red shift of the light absorption threshold of TiO2 nanotubes due to the presence of cuprous oxide even for very low circulated charges, while electrochemical impedance measurements proved a significant reduction of the electrode impedance due the presenc…

PhotocurrentMaterials scienceAqueous solutionCu2O/TiO2 nanotubes heterojunctions electrochemical fabrication XRD Raman Spectroscopy Photoelectrochemical measurements Electrochemical Impedance SpectroscopyAnodizingScanning electron microscopeGeneral Chemical EngineeringAnalytical chemistryOxideHeterojunctionElectrochemistrychemistry.chemical_compoundsymbols.namesakeSettore ING-IND/23 - Chimica Fisica ApplicataChemical engineeringchemistryElectrochemistrysymbolsRaman spectroscopyElectrochimica Acta
researchProduct

Influence of post formation proceses on electrochemical and photoelectrochemical behaviour of TiO2 nanotubes

2011

electrochemical impedance spectroscopySettore ING-IND/23 - Chimica Fisica ApplicataTiO2 nanotubesphotoelectrochemistry
researchProduct